• Press and hold or to scroll through the
list of predefined Unit IDs at a fast scroll rate.
Press the Menu Select button directly below
Sel to select the predefined Unit ID.
If the selected predefined Unit ID has more than
the maximum allowed characters, or an invalid
character in it, the display shows momentary
Invalid UnitID.
4 Enter your password when you see a blinking
cursor.
5
Press the Menu Select button directly below Logn
or Ok.
If only one-factor is enabled, the display shows 1F
logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login
failed. The display returns to User Login
screen.
6 For radio enabled with two-factor login, enter your
passcode when you see a blinking cursor.
7 Press the Menu Select button directly below
Logn.
The display shows
In progress.
If the login fails, the display shows momentary 2F
pscd failed. Press the Menu Select button directly
below Pscd to re-enter passcode. If successful, the
display shows User Login screen with 2F logged
in status to indicate Two-Factor Authentication
complete.
Logging out of Two-Factor Authentication
Note: Private data refers to all messages in the text
messaging Inbox, Draft, and Sent folder. The next
user is able to access the Inbox, Draft and Sent
messages if private data is not deleted.
Radio which is successfully logged in to the secured
system receives advertisement from the server that
the access to the data for query is enabled.
1 Press the Menu Select button directly below
Logt.
One of the following scenarios occurs:
•
The display shows Clear private data?.
• If the Delete Messages On Session End
feature is enabled, the display shows
momentary Private data cleared.
118
English
To Next Page
Loading...
Need help?
General
