Motorola APX 2000 User Manual

•
or to Save as Home and press the
Menu Select button directly below Sel and
proceed to 5.
•
or to Save as Dest. and press the
Menu Select button directly below Sel and
proceed to 5.
A blinking cursor appears in the screen.
3 Use the keypad to edit the auto-generated
waypoint, if required or press the Menu Select
button directly below Cncl to return to the Location
main screen.
4
Press the Menu Select button directly below Ok
once you are done.
One of the following scenarios occur:
•
The display shows Current loc saved as
<Waypoint name>.
•
The display shows Current loc saved as
[Home].
•
The display shows Current loc saved as
[Destination].
5
To return to the Home screen, press , the PTT
button, the preprogrammed GPS button or the
Menu Select button directly below Exit.
Viewing a Saved Waypoint
Ensure your radio shows the current location on the
screen.
1 Press the Menu Select button directly below
Optn.
2
or to Waypoints and press the Menu
Select button directly below Sel.
The display shows a list of waypoints.
3 Perform one of the following actions:
• or to scroll through the list.
• or to select a waypoint to view the
location information in full.
4 Press the Menu Select button directly below
Optn.
5 To view the MGRS or latitude/longitude location,
time and date of the selected waypoint, or
Advanced Features
134
English

Motorola APX 2000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Bluetooth	No
Frequency Range	700/800 MHz
Power Output	1-5 W (VHF), 1-3 W (700/800 MHz)
Channels	Up to 1, 000
Battery Life	Up to 10 hours (digital)
Digital Protocol	APCO P25
Frequency	VHF: 136-174 MHz, UHF: 380-470 MHz, 700/800 MHz: 764-870 MHz
Power	1-3W (700/800 MHz), 1-5W (VHF)