Motorola APX 2000 User Manual

Pairing the Authentication PIN when Receiving a
Pairing Request
1
When the radio display shows <Device Friendly
Name> pair request, perform one of the
following actions:
• To accept, press the Menu Select button
below Ok.
• To reject, press the Menu Select button below
Cncl
Your radio only supports HSP, DUN, PAN and
SPP Bluetooth profiles.
When the pairing timer expires, the display shows
<Device Friendly Name> pair canceled and
return to Home screen.
If you choose to accept the pairing process, the
display shows Compare PIN: XXXXXX.
If you choose to reject the pairing process, the
display shows Cancel pairing in
progress... followed by <Device Friendly
Name> pair canceled and return to Home
screen.
2 Perform one of the following actions when the
display shows Compare PIN: XXXXXX.:
•
Press the Menu Select button below Ok if the
PIN is correct.
•
Press the Menu Select button below Cncl to
reject if the PIN number is incorrect. The
display shows Cancel pairing in
progress... followed by <Device Friendly
Name> pair canceled and return to Home
screen.
When the PIN authentication timer expires, the
display shows <Device Friendly Name>pair
canceled and return to Home screen.
If successful, the display shows Pairing in
progress...., <Device Friendly Name>
paired followed by <Device Friendly
Name>connected.
If unsuccessful, one of the following scenarios will
occur:
•
The display shows <Device Friendly Name>
pair failed (if the pairing timer expires).
Advanced Features
152
English

Motorola APX 2000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Bluetooth	No
Frequency Range	700/800 MHz
Power Output	1-5 W (VHF), 1-3 W (700/800 MHz)
Channels	Up to 1, 000
Battery Life	Up to 10 hours (digital)
Digital Protocol	APCO P25
Frequency	VHF: 136-174 MHz, UHF: 380-470 MHz, 700/800 MHz: 764-870 MHz
Power	1-3W (700/800 MHz), 1-5W (VHF)