Motorola APX 2000 User Manual

Note: The device name of your radio is
preprogrammed. Check with your dealer or system
administrator for more information.
1 Perform one of the following actions:
• Press the preprogrammed Info button.
•
or to Info and press the Menu Select
button directly below Info.
2
or to IP Info and press the Menu Select
button directly below Sel.
The display shows the IP Info screen.
3 Perform one of the following actions:
• or to scroll through the various
information.
• Press the Menu Select button directly below
Back to return to the previous screen.
•
Press
to return to the Home screen.
Viewing the Control Assignments
This feature displays the programmable radio
functions assigned to the controls of your radio for the
currently selected channel.
See Programmable Features on page 34 for more
information on the various programmable features of
your radio.
1 Perform one of the following actions:
•
Press the preprogrammed Info button.
•
or to Info and press the Menu Select
button directly below Info.
2
or to Control map and press the Menu
Select button directly below Sel.
The display shows the Control Map screen.
3 Perform one of the following actions:
• or to scroll through the various
information.
• Press the Menu Select button directly below
Back to return to the previous screen.
•
Press
to return to the Home screen.
Editing the Soft ID
Your radio must be preprogrammed to allow you to
use this feature.
This feature allows you to change your username.
Advanced Features
178
English

Motorola APX 2000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Bluetooth	No
Frequency Range	700/800 MHz
Power Output	1-5 W (VHF), 1-3 W (700/800 MHz)
Channels	Up to 1, 000
Battery Life	Up to 10 hours (digital)
Digital Protocol	APCO P25
Frequency	VHF: 136-174 MHz, UHF: 380-470 MHz, 700/800 MHz: 764-870 MHz
Power	1-3W (700/800 MHz), 1-5W (VHF)