Preparing Your Radio for Use
English
9
Ensure the Up and Down Arrow Button is in Volume
mode by pressing the Multi Function Button (MFB) to
toggle to Volume mode.
MFB must be preprogrammed to a programmable
button.
Pairing Radio with Pod and Earpiece†‡
Plug the earpiece to the wireless Pod.
Verify that both your radio and pod are powered ON and in
pairing mode. Place the Bluetooth pairing spot on your Pod
within one inch of the Bluetooth pairing spot on your radio.
Your radio Blue LED lights up solid for 2 seconds once
connected and followed by blinking blue at heartbeat pace to
indicate there is Bluetooth device connected to your radio.
Note: Ensure the microphone is not covered when you speak
into the microphone.
Your Pod can function as a standalone PTT device
without the earpiece.
Mission Critical
Wireless Pod
Headset
Bluetooth Pairing Spot
APX_3000_M1.book Page 9 Thursday, November 7, 2013 4:48 PM
To Next Page
Loading...
Need help?
General
