• Press the Transmit Inhibit programmable button.
NOTICE: If the user has disabled TX Inhibit using the softkey and then moves the switch
to the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit off. You hear a sequence of short, high-low tone (Transmit
Inhibit Off tone) to indicate that the transmission is back to normal operation.
6.24.16
General Radio Information
Use this menu item to view the general information of your radio.
The available information are:
• Radio Information
• IP Display
• Control Assignments
• Soft ID (if enabled)
6.24.16.1
Accessing the Radio Information
When and where to use: This feature displays the following radio information:
• Host Version
• Secure Version
• Model Number
• ESN
• Flash Code
• Tuning Version
• Option Board Type (optional)
• Option Board Bluetooth Address (optional)
• Expansion Board Type (optional)
• MFK Secondary Function
• DSP Version
• KG (Secure Algorithm)
• Serial Number
• Flash Size and Type
• RF Band(s)
• Processor Version
• Option Board Serial Number (optional)
• Option Board Software Version (optional)
• Language Pack ID and Version (only when the language of the display is set to non-English)
• Codeplug Alias (Optional)
MN003110A01-AJ
Chapter 6: Advanced Features
103
To Next Page
Loading...
