6.3
Scan Lists
Scan lists are created and assigned to individual channels/groups. Your radio scans for voice activity
by cycling through the channel/group sequence specified in the scan list for the current channel/group.
Your radio supports different types of Scan Lists:
• Conventional Scan List
• Talkgroup Scan List
• Trunking Priority Monitor Scan List
Refer to a qualified radio technician for the maximum number of Scan Lists to be preprogrammed in
your radio.
6.3.1
Intelligent Priority Scan
Intelligent Priority Scan feature allows you to add or delete conventional channels and trunking
talkgroups from multiple system into the priority scan lists.
When the radio locks onto a channel in the Intelligent Priority Scan list, radio scans for higher priority
member within the same Trunking or Conventional system.
6.3.2
Viewing a Scan List
Procedure:
1 or to ScnL and press the Menu Select button directly below ScnL .
2
or to view the members on the list.
3 Press to exit the current display and return to the Home screen.
6.3.3
Editing the Scan List
When and where to use: This feature allows you to change scan list members and priorities.
Procedure:
1 Perform one of the following actions:
• Long press the preprogrammed Scan List Programming button (side button).
• or to ScnL then press the Menu Select button directly below ScnL .
The display shows the lists that can be changed.
2 or to the entry you want to edit.
3 Perform one of the following actions:
• Press the Top Side button to add and/or change the priority of the currently displayed
channel in the scan list.
• Press the Menu Select button directly below Del to delete the currently displayed channel
from the scan list.
• Press the Menu Select button directly below Rcl to view the next member of the scan list.
4 Otherwise, proceed to the next step.
MN003110A01-AJ
Chapter 6: Advanced Features
47
To Next Page
Loading...
