Upgrading Your Radio
FLASHport User’s Guide
10
6. The following View Radio Configuration screen will appear.
Make a note of the FLASHcode and System Package fields
currently set for the radio. After the upgrade, you’ll re-examine
this screen to make sure the upgrade was successful. (Note
that you can click on the Details button to view the features
currently enabled on this radio.)
7. Close the View Radio Configuration screen. From the menu
bar in the CPS main window, select:
Tools → FLASHport → Read FlashKey Configuration
The following Read FLASHkey Configuration screen will
appear.
94C35_Book.book Page 10 Thursday, June 2, 2005 3:10 PM
To Next Page
Loading...
