Motorola ASTRO XTS 5000 - Belt Clip; Figure 8-8. Aligning the Belt Clip with the Battery; Figure 8-9. Pressing the Belt Clip into Place; Figure 8-10. Pressing the Belt Clip Tab Away from the Battery

6881094C28-D July 16, 2004
Disassembly/Reassembly Procedures: Belt Clip 8-7
8.4 Belt Clip
This section explains how to attach and remove the belt clip.
NOTE: The battery must be removed from the radio before the belt clip can be installed or removed.
8.4.1 Attach the Belt Clip
To attach the belt clip:
1. Align the grooves of the belt clip with those of the battery.
Figure 8-8. Aligning the Belt Clip With the Battery
2. Press the belt clip downward until you clear a click.
Figure 8-9. Pressing the Belt Clip into Place
8.4.2 Remove the Belt Clip
To remove the belt clip:
1. Use a flat-bladed object to press the belt clip tab away from the battery.
Figure 8-10. Pressing the Belt Clip Tab Away From the Battery
2. Slide the belt clip upward to remove it.
Figure 8-11. Removing the Belt Clip
Slots
Batter
y
Battery
Grooves
Slots
Batter
y
Battery
Met
al
Tab
Tab