1. Setting Up Service 1
Setting Up Service
⽧ Setting Up Your Phone (page 1)
⽧ Activating Your Phone (page 2)
⽧ Setting Up Voicemail (page 2)
⽧ Enabling Security (page 3)
⽧ Account Passwords (page 3)
⽧ Getting Help (page 4)
Your Phone’s Navigation Pad
Setting Up Your Phone
1. Make sure your SIM card is in place.
䡲 See “Your SIM Card” on page 8.
2. Install the battery.
䡲 See “Installing the Battery” on page 10.
3. Press and hold the End/Power Key (@) for two
seconds to turn the phone on.
䡲 If your phone is activated, it will turn on, search for
service, and enter standby mode.
● If your phone's SIM PIN is set, you may be
prompted to enter your SIM PIN code when
you turn on your phone. Enter the four-digit
number and press the left softkey (the top left
key below the display screen) to select
Ok.
Press
Yes (left softkey) to allow phone
transmissions as prompted. (See “SIM Card
Security” on page 89 for more information.)
䡲 If your phone is not yet activated, see “Activating
Your Phone” on page 2 for more information.
To Next Page
Loading...
Need help?
General
