80 6. Settings
Storing a Temporary Profile
To store a temporary profile as a new profile:
1. Press / > Tools > Profiles.
2. Highlight the temporary profile and press / >
Store As New.
3. Enter a name and press r.
To overwrite the profile the temporary profile is based on:
1. Press / > Tools > Profiles.
2. Highlight the temporary profile, press
/
> Store Changes, and then press Yes
(left softkey).
Creating Profiles
1. Press / > Tools > Profiles > [New Profile].
2. Enter a name and press r.
3. To base this profile on an existing profile, select
Copy From and then select a profile and press r.
If you do not choose a profile to copy from, the new
profile is based on a default profile.
4. Press Create (left softkey).
5. Scroll through the list of options and set their
values.
6. When you are finished, press Done (right softkey).
Editing Profiles
1. Press / > Tools > Profiles.
2. Highlight a profile, press / and then select Edit.
3. Scroll through the list of options and set their
values.
4. When you are finished, press Done (right softkey).
Deleting Profiles
To delete a profile:
1. Press / > Tools > Profiles.
2. Highlight a profile, press /, and then select
Delete.
3. Press r or press Yes (left softkey).
Note: The temporary profile is stored with the name of the
profile it is based on. The profile it is based on, as it
existed before you made changes to settings, is gone.
To Next Page
Loading...
Need help?
General
