Programming Mode
31
Programming Mode
Programming mode allows you to change the following settings on your radio:
• Channel
• Configure the operating frequency from a pre-programmed frequency list
• Interference eliminator code
• Call tones
• Microphone gain
• Scan list (CLS1410 only)
• Available channels (CLS1410 only)
Note:
•
To talk with someone on your two-way radio, the channel (CLS1410 only), frequency, and
interference eliminator code must be the same on both radios.
• You cannot enter programming mode while a VOX accessory is plugged into the radio.
To Next Page
Loading...
