Spirit GT Series Programming
50
Spirit GT Series Programming
The _Series platform is designed to replace the Spirit GT Series radio. The first
eight frequencies and 38 interference eliminator codes of
_Series are compatible
with Spirit GT Series. To program your
_Series radio to talk with a Spirit GT
Series, verify or change your Spirit GT settings as follows.
To verify the frequency and code:
1. Press the Menu button 3 times. The channel number and frequency display.
2. Press Menu again. The interference eliminator code displays.
To change the frequency:
1. Enter programming mode by pressing and holding
Push to Talk
for
approximately 5 seconds while turning the radio on, then release
Push to Talk
.
2. Use the Scroll button to select one the eight frequencies.
To change the interference eliminator code:
1. Enter programming mode by pressing and holding
Push to Talk
for
approximately 5 seconds while turning the radio on, then release
Push to Talk
.
2. Press the Menu button. The code number blinks.
3. Use the Scroll button to select the code.
To exit programming mode on a Spirit GT Series radio, press
Push to Talk
or the
radio will exit programming mode after five seconds.
To Next Page
Loading...
Need help?
General
