Programming Mode
33
Entering Programming Mode
Press and hold
Push to Talk
and T for 3 seconds while turning the radio on. The
radio beeps and displays k
, the channel number blinks, and the frequency
(indicated by l) and code (indicated by y) display alternately.
Note:
If you press and release the
Push to Talk
button when programming CSL1410
models, you will return to the front of the Programming Mode.
Selecting a Channel (CLS1410 Only)
1. In programming mode, press S until the channel number blinks
and the frequency and code display alternately (this is the first
setting after you enter programming mode).
2. Press
[or ] to select the channel.
3. Press and hold
Push to Talk
to exit programming mode, or
press S to continue programming.
Configuring the Operating Frequency from a Pre-programmed Frequency List
1. In programming mode, press
S until l displays and the
frequency number blinks.
2. Press
[ or ] to select the frequency.
3. Press and hold
Push to Talk
to exit programming mode, or press
S to continue programming.
Note:
See page 44 for information on frequencies for communicating with other business
radios. If you are matching your _ Series radio to an existing Spirit GT radio, see
page 50.
To Next Page
Loading...
Need help?
General
