7
Getting Started
Charging the CP100 Radio
Charge the NiMH battery for 16 hours before using
it for the first time. It will only need up to eight hours
of charging thereafter.
1. Make sure the radio is off.
2. Lift the accessory cover and plug the charger
(NNTN4077) into the lower jack.
3. Plug the charger into a power outlet. The light
on the charger glows during charging.
Note: For optimum battery life, do not charge the
battery for prolonged periods after it is fully
charged. Charging the battery over the
weekend is acceptable.
If the radio is on while charging, additional
time is required to charge the battery.
Use only the charger supplied with the
radio, or other CP100 power accessories.
See “Battery and Charging Options” on
page 11.
CP100
Light
getstarted.fm Page 7 Monday, March 3, 2003 12:16 PM
To Next Page
Loading...
