Motorola CP100 - Programming Individual Settings

21
Programming Features
Programming a Channel (15 ch models only)
Each channel has its own Frequency, Interference Eliminator Code, Scramble Code,
and Bandwidth Settings.
Program each channel separately.
1. Select the channel that you will be programming.
2. The channel number flashes. l and code displays
alternately.
3. Press [ or ] to select the desired channel.
4. Press and hold M to exit k, or press
\
to continue.
Programming the Frequency
Sets the frequency that your radio will use. As you are matching your
CP100 radio to existing SP21 radios, enter Programming Mode as
necessary, refer to page 20.
1. Press \to display l. The frequency flashes.
2. Press
[
or
]
to select the desired frequency (See
“Frequencies and Bandwidths” beginning on page 34).
3. Press and hold M to exit k, or press
\
to continue.
6
operation.fm Page 21 Monday, March 3, 2003 12:59 PM