Motorola CP100 - Programming Microphone Gain

25
Programming Features
3. Press
[
or
]
to hear and select the call tone you want.
Note: The default is set to 0 (off) or you may choose 1
, 2, or 3 to choose a
distinctive call tone.
4. Press and hold M to exit k.
Once enabled, press
B
to transmit the call tone to others.
Programming Microphone Gain
The sensitivity of your radio’s microphone can be adjusted to suit different users or
operating environments.
1. Enter Programming Mode as necessary, refer to “Entering Programming Mode”
on page 23.
2. Press
\
until g and
? (Gain) display.
3. Press
[
or
]
to select the sensitivity level.
3 = High sensitivity, for quiet environments
2 = Medium sensitivity, the default setting
1 = Low sensitivity, for loud environments
4. Press and hold M to exit k.
3
?
operation.fm Page 25 Monday, March 3, 2003 12:59 PM