Motorola CP150 - Test Equipment, Service Aids, and Service Tools

Test Equipment, Service Aids, and Service Tools 2-13
2.8 Test Equipment, Service Aids, and Service Tools
Table 2-1 lists test equipment recommended for working on the CP150/CP200 Radio. While all of
these items are available from Motorola, most are standard shop equipment items, and any
equivalent item capable of the same performance may be substituted for the item listed.
Table 2-2 lists service aids recommended for working on the CP150/CP200 Radio. While all of these
items are available from Motorola, most are standard shop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed
Table 2-1 Recommended Test Equipment
Motorola Part No. Description Characteristics Application
R2600 series System analyzer This item will substitute for
items with an asterisk (*)
Frequency/deviation meter and
signal generator for wide-range
troubleshooting and alignment
*R1074A Fluke 87 digital multi-
meter
True RMS metering,
200 kHz frequency
counter, 32-segment bar
graph with backlit display
Digital voltmeter is recom-
mended for AC/DC voltage and
current measurements
Fluke 85 RF probe 500 MHz, 30 VAC max Use with Fluke 87 digital multi-
meter for RF voltage measure-
ments.
*R1377A AC voltmeter 1 mV to 300 mV, 10 mega-
ohm input impedance
Audio voltage measurements
R1611A Dual channel
100 MHz oscillo-
scope (Agillent)
Two-channel, 100 MHz
bandwidth, 200 M sample
rate/sec, 2 MB memory/
channel
Waveform measurements
S1339A RF millivolt meter 100 µV to 3V RF, 10 kHz to
1 GHz frequency range
RF level measurements
*R1013B or
*R1370A
SINAD meter or
SINAD meter with
RMS
Without RMS audio voltme-
ter or
With RMS audio voltmeter
Receiver sensitivity measure-
ments
Table 2-2 Service Aids
Motorola Part
No.
Description Application
RLN4460 Portable Test Set Enables connection to the audio/accessory jack.
Allows switching for radio testing.
RLN4510 Battery Interface Regulates DC current and voltage between radio and
power supply.
RVN4191 Customer Programming Soft-
ware and Global Tuner Software
on CD Rom
Program customer option and channel data.
AAPMKN4004 Programming Test Cable Connects radio to RIB (PLN4008).