Motorola CP150 - Dust Cover Disassembly; Speaker Disassembly

Radio Disassembly — Detailed 2-5
2.5.2 Dust Cover Disassembly
a. Gently pry the top of the dust cover away from the body of the radio. (See Figure 2-4.)
b. Rotate the dust cover 90° in a counter clockwise direction to allow the key to be
removed.
c. Separate the dust cover away from the body of the radio. The dust cover key is fragile;
apply only light pressure to the key while removing the dust cover.
Figure 2-4. Dust Cover Removal
2.5.3 Speaker Disassembly
1. Remove the two screws from the speaker retainer using a T6 Torx screwdriver.
2. Lift the speaker out from the front housing.
NOTE:
The speaker is held in place with a retainer bracket. Be careful not to damage the speaker
when removing the retainer bracket.
Figure 2-5. Removal Speaker-Microphone Assembly
k
ey
c. Separate dust
cover from body.
b. Rotate dust cover 90
° to
a. Pry dust cover from body.
allow key to be removed.
Retainer Bracket
Speaker
Radio Housing
Wire Connector