Motorola CT2 - Motorola CT2 Memory Functions; Storing Numbers in Two-Touch Memory; Dialing and Managing Memory Numbers

13Memory
4. Memory
You can store ten telephone numbers in the two touch memory; the numbers can be up to
16 digits long.
4.1 Store a two-touch memory number
1. Dial the number to be stored.
2. Press
m.
3. Press one of the numbers on the keypad 0-9, the number is stored.
4.2 Store a two-touch memory number from the calls list
1. Press u to open the received or d to open the missed calls list.
2. Scroll
u or d to required number.
3. Press
m.
4. Press one of the numbers on the keypad 0-9.
4.3 Dial a two-touch memory number with the handset lifted
1. Lift the handset.
2. Press
M
.
3. Press one of the keypad buttons 0-9.
4. The memory number will be dialled.
4.4 Dial a two-touch memory number over the hands-free
1. Press
M
.
2. Press one of the keypad buttons 0-9.
3. The memory number will dial out automatically.
4.5 Check and delete a memory number
1. Press
M
.
2. Press and hold the relevant keypad number 0 - 9 for 3 seconds.
3. The memory number will be displayed.
4. Press
D to delete the memory number.
NOTE
Remember to make a note of your memory numbers for easy reference.