Motorola CT2 - PABX Access Code Setup for CT2

16 PABX access code
7. PABX access code
If the CT2 is connected to a switchboard, you may need to enter a one-digit access code
in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen.
7.1 Store the PABX access code
1. Press m, the display shows SEt 1 dAtE .
2. Scroll
u or d to SEt 3 PCOdE .
3. Press
m, the display shows PCOdE - .
4. Press
u or d to scroll to the correct digit from 0 - 9 .
5. Press
m to conrm.