Personal settings 25
3.
Press u or d to select the ringtone.
- A sample of the ringtone is played.
4.
Press m to confirm.
5.
Press > to return to standby.
7.1.3 Group melody
To benefit from this feature, you must subscribe to the Caller
Line ldentification service.This menu enables you to select
and set the melodies to be played when there is an external
incoming call from a contact whose name is stored in your
phonebook and is part of a group. You can associate 1 ring
melody to each group. There are three phonebook groups
(Group A, B, C) available for you to organize your contacts.
Each group can be assigned a unique melody.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m and scroll d to
GROUP MELODY
. Press m.
3.
Scroll u or d to select:
GROUP A
,
B
or
C
, then press
m.
4.
Press u or d to select the ringtone you want for the
group and press
m.
5.
Press > to return to standby.
7.1.4 Key tones on/off
When you press a key on the handset you hear a beep. You
can switch these beeps on or off.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m and scroll d to
KEY TONE
. Press m.
3.
Scroll u or d to select
ON
or
OFF
.
4.
Press m to confirm.
5.
Press > to return to standby.
7.1.5 First ring
Your D1000 will automatically detect the Caller identification
(Subscription dependent). If you do not wish to hear the ring
before the caller identification is displayed you can manually
set FIRST RING to OFF. The default setting is ON.
1.
Press m, scroll d to
PERSONAL SET
and press m.
2.
HANDSET TONE
is displayed. Press m and scroll d to
FIRST RING
. Press m.
3.
Scroll u or d to select
ON
or
OFF
.
4.
Press m to confirm.
5.
Press > to return to standby.
To Next Page
Loading...
Need help?
General
