Advanced settings 33
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
SEL. COUNTRY
. Press m.
3.
Enter the 4-digit master PIN and press m.
4.
Scroll u or d to display the required country.
5.
Press m to confirm.
8.14 Intrusion
When an external call is taking place, another handset
registered to the base can join in, making the call a 3-way
conference, just by pressing
<.
To enable this, Intrusion must be switched On.
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
INTRUSION
. Press m.
3.
Scroll u or d to
ON
or
OFF
.
4.
Press m to confirm.
5.
Press > to return to standby.
8.15 ECO mode
To reduce the level of power emissions, you can select low
power or ECO mode. When the ECO mode is set to
ON
, the
base transmission power will be reduced.
To turn ECO Mode to
ON
or
OFF
:
1.
Press m, scroll d to
ADVANCED SET
and press m.
2.
Scroll d to
ECO MODE
and press m.
3.
Press u or d to highlight
ON
or
OFF
then press m to
confirm.
- A confirmation beep is emitted and the handset
display will switch between the handset’s name and
ECO MODE
.
NOTE
When Eco Mode is set to
ON
, the handset range will be
reduced.
To Next Page
Loading...
Need help?
General
