Using the phone 15
ringtone as soon as the call is received then once the caller’s
identity is displayed, the assigned ringtone will start. See
“First ring” on page 25.
TIP
If Auto Pick up mode (see page 26) is on, simply lift up the handset
from its base to answer the call. The default setting is On.
NOTE
An incoming call has priority over other events. Whenever
there is an incoming call, other operations in progress such
as phone settings, menu navigation, etc. will be ended.
3.1.7 Adjust volume
1.
During a call, press u or d to adjust the earpiece or
loudspeaker volume.
- The level is shown in the handset display.
3.1.8 Mute
Mute the microphone so that you can talk to someone else
in the room without your caller hearing you.
1.
During a call, press e.
- The microphone is muted.
2.
Press e again to turn the microphone back on.
3.1.9 End a call
1.
Press >.
After you hang up, the duration the phone is off-hook is
displayed for 5 seconds.
NOTE
If auto hang-up is on (see page 26) simply replace the handset
on the base to end the call. The default setting is ON.
3.1.10 Switch handset on/off
1.
Press and hold > until the handset switches off.
2.
Press and hold > again to switch the handset back on.
3.2 Intercom
This feature is only available when there are at least 2
registered handsets. It allows you to make internal calls,
transfer external calls from one handset to another and use
the conference option.
3.2.1 Call another handset
1.
Press I.
• If you have two handsets, the other handset is called
automatically.
• If more than two handsets are registered to the base,
their numbers are displayed, e.g.
2345*
. Enter the number
of the handset you want to call or press
* to ring all
handsets.
2.
Press > to hang up.
NOTE
If the handset does not belong to D1000/1010 range, this
function may not be available.
To Next Page
Loading...
Need help?
General
