Motorola D1002 User Manual

Clock & Alarm 23
5.2.5 Delete entire redial list
1. Press e then press m.
2. Scroll d to DELETE ALL and press m.
3. Display shows CONFIRM? . Press m to confirm. Press
> to return to standby.
6. Clock & Alarm
If you subscribe to your network’s Caller Identification service,
the time on your D1000 may be set automatically each time
you receive a call, depending on your network provider.
You can also set or adjust the time using the Clock & Alarm
menu.
6.1 Set date and time
1. Press m and scroll d to CLOCK/ALARM . Press m.
Display shows
DATE & TIME , then press m.
2. Enter the date using the format DD/MM e.g. 04/ 08 for 4th
August.
3. Press m and enter the time using the 24 hour format
HH:MM , e.g. 14:45 for 2:45pm.
4. Press m to confirm.
5. Press > to return to standby.
NOTE
The date and time is retained during a power failure or when
the batteries are discharged.

Motorola D1002 Specifications

General

Type	DECT telephone
Maximum indoor range	50 m
Maximum outdoor range	300 m
Speakerphone	Yes
Phonebook capacity	100 entries
Redial list capacity	10
Call list capacity phonebook	40
Volume control	Digital
Display number of lines	4 lines
Display number of colors	Monochrome
Frequency band	1.88/1.9 GHz
Camera included	No
Product color	Black
Standby time	100 h
Battery technology	Nickel-Metal Hydride (NiMH)
Number of batteries supported	2