18 Phonebook
4.5 Enter a pause
If your D1000 is connected to a switchboard, you may need
to enter a pause in a stored number. This gives the
switchboard time to get an outside line. A Pause is normally
stored after the switchboard access code (e.g. 9)
1.
When storing a number, press and hold # until the
display shows P. You can then continue storing the
phone number.
4.6 View an entry
In standby:
1.
Press d.
2.
Enter the first letter of the name to search alphabetically
then scroll
u or d to the exact entry. The name is
displayed.
3.
Press e to display the number. If there are more
than 12 digits, press
e again to see the rest of the
number.
4.
Press > to return to standby.
During a call:
1.
Press m twice to open the phonebook menu.
2.
Enter the first letter of the name you want then scroll u
or
d if necessary to the exact name. Press e to
display the number. If there are more than 12 digits,
press
e again to see the rest of the number.
3.
Press > to cancel the phonebook display.
4.
Press > again to end the call.
4.7 Edit an entry
1.
Press d.
2.
Scroll u or d to the entry you want to edit and press
m.
EDIT ENTRY
is dsplayed. Press m again.
3.
Edit the name and press m to confirm. Use e to
delete characters.
4.
Press m and edit the number.
5.
Press m to confirm.
6.
Scroll u or d to select
NO GROUP
,
GROUP A
,
B
or
C
and
press
m to confirm.
7.
Press > to return to standby.
4.8 Delete an entry
1.
Press d.
2.
Scroll to the entry you want to delete and press m.
3.
Scroll d to
DELETE ENTRY
and press m.
4.
Display shows
CONFIRM?
. Press m.
To Next Page
Loading...
Need help?
General
