49Memory card & file transfer
Connect through a Wi-Fi network
Note: Most public Wi-Fi networks (like the ones at
coffee shops) don’t let devices connect to each other.
In that case, you need a USB cable connection.
1 Touch > Phone portal
2 If your phone is
connected to a W-Fi
network, it shows an
MPP URL. Use a
computer on the
network to enter the
URL in a browser. It
opens the MPP
home screen!
Tip: When your phone’s Wi-Fi is on, it automatically
reconnects to nearby networks it has used. To turn
Wi-Fi on or off, touch Menu > Settings >
Wireless & networks > Wi-Fi
If your phone is not connected to a Wi-Fi network, it
asks you to connect. Touch OK to open the Wi-Fi
settings screen, then turn on Wi-Fi and touch a
network to connect.
For network passwords, ask other network users or
administrators. For your phone’s MAC address and
Wi-Fi details, touch Menu > Advanced.
http://192.168.1.127:8080
When your phone is connected ( appears in the
status bar), touch Back to close the settings.
Soon, MPP shows a URL at the bottom of your
screen. Using a computer on the same Wi-Fi
network, just type the URL into the browser to open
the MPP home screen!
Connect through a USB cable
1 Turn on your phone and
computer and connect
them with a USB-to-micro
USB cable.
Your computer might guide
you through installing
Motorola drivers.
2 Once your computer has the correct Motorola
drivers, it opens the MPP home page in your
browser. A Motorola icon appears in your task
bar, in the lower right of your computer screen.
If you have Motorola Media Link, it will launch
instead of MPP. To use MPP, right-click in your
task bar, select “When the phone connects,
launch...” and choose MPP. Disconnect and
reconnect your phone to launch MPP.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
