2. Touch Security.
3. Adjust settings:
•
WP3 is the most secure choice.
•
Choose WPA2/WPA3 for newer devices (made after July 2020). Older devices may not be able to
connect to a WPA3 or WPA2/WPA3 mixed network.
•
Choose WPA2 (AES) for the widest compatibility with both current and older devices.
•
Don’t use None for this setting.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Touch Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
To stop the connection, touch the notification and turn off USB tethering, then disconnect your phone and
computer.
Bluetooth tethering
To connect a device to the internet using your phone's cellular data and a Bluetooth connection:
1. Check that cellular data is on. If cellular data is off, your phone doesn't have an internet connection to
share.
2. Turn on Bluetooth on your phone and pair with the other device.
3. Set up the other device to get its network connection via Bluetooth.
4. On your phone, go to Settings.
5. Touch Network & internet > Hotspot & tethering.
6. Turn on Bluetooth tethering to start the connection.
To stop the connection, turn off Bluetooth or touch & hold in quick settings and disconnect the device.
Connect to VPNs
A virtual private network (VPN) lets you access files on a secure network like an office network with a
firewall. Contact your network administrator for VPN settings and any additional apps or requirements.
To set up a VPN connection:
1. Go to Settings > Network & internet.
2. Touch VPN. If prompted, set a screen lock PIN or password.
Settings : Network and internet
125
To Next Page
Loading...
