4.
To customize a selected sound profile, next to the profile name touch , then:
•
Choose an equalizer preset to enhance treble, bass, or vocals.
•
To get a surround sound experience, turn Surround virtualizer on.
•
To keep the same volume level when you switch between audio sources, turn Volume leveler on.
•
To learn more about these settings, touch > Help.
•
To revert a profile to its original settings, touch > Reset.
•
To revert to all original settings, on the main Dolby Atmos screen, touch Settings > > Reset
settings.
Turn Dolby Atmos off
To turn Dolby Atmos off for headphones or another connected device, open quick settings and touch .
To turn it off when you're listening through the loudspeaker:
1. Go to Settings > Sound & vibration > Dolby Atmos.
2.
Touch > About.
3. Tap the version listed three times to add the on/off switch.
4.
Turn it off .
Silence calls & notifications
When you're busy, use Do Not Disturb to mute ringtones for incoming calls, stop vibration, and block
notifications.
Quickly turn Do Not Disturb on or off
Turn it on
1.
Open quick settings and touch .
You'll see in the status bar when Do Not Disturb is on.
2.
To change how long it stays on, in quick settings, touch & hold , touch Duration for Quick Settings,
and then choose one:
•
To keep it on indefinitely, touch Until you turn off.
•
To select a duration, touch For 1 hour, then touch + or - to adjust the time.
•
To choose each time you turn Do Not Disturb on, touch Ask every time.
Turn it off
Open quick settings and touch .
If it's turning itself on again, but you don't want it to:
•
Make sure you're not silencing on a schedule or during calendar events.
Settings : Sound & vibration
153
To Next Page
Loading...
