Quick Change Battery Removal/Replacement
The quick change method
allows you to remove your
telephone battery at any time
and replace it with a charged
spare battery during a
telephone call.
This is especially useful if
you receive the low battery
warning, flashing battery symbol, or audible tone
during a call. Simply remove the battery from the
telephone, put on the spare battery, and press ∏.
This will return you to your telephone call. The phone
will not go through the normal start-up self tests
described on page 19. You will have only three
seconds to complete this action before your telephone
call is terminated. It is a good idea to practice this
procedure a few times before using it on an actual
call. Advise the party on the other end of the call
before beginning this procedure.
18
Introduction
To Next Page
Loading...
