Motorola GM160

13
English
GETTING STARTED
SELECTING A ZONE
A zone is a group of up to 16 channels. Before
you can access a channel in a zone, you must
select the zone in one of two ways:
Method 1
Method 2 (if programmed by your dealer [see
pages 5 -6]).
SELECTING A RADIO CHANNEL
Your radio offers 128 channels (8 zones of 16
channels each).
Note: Due to government regulations, some
channels may not be programmed. See your
dealer for more information.
There are three ways to select a channel:
Method 1
Method 2 (if programmed by your dealer [see
pages 5 -6]).
Method 3 (if programmed by your dealer [see
pages 5 -6]).
1
u to enter Menu Mode.
2
y or z until
3
u to select
4
y or z until you see the desired zone
name.
5 u to select the zone.
1 Press the Direct Zone Access button.
2 y or z until you reach the desired
zone.
3 u to select the zone.
Zone
Zone
1 Select the appropriate Zone, if required.
2 y or z until you reach the desired
channel, shown on LCD display.
1 Press the Home Revert button.
1 Press the Direct Channel Access button.