Motorola GM160

29
English
PHONE
MODIFYING THE PHONE LIST K
You can modify a phone list in one of the
following ways:
• Add an entry
• Delete an entry
• Edit an existing entry
• Edit an Access/Deaccess code
When you are modifying the phone list, the
K symbol will appear on the display.
Note: Your radio cannot receive any calls while you
are modifying the phone list.
Adding an Entry (when using the keypad
microphone only)
To add an entry:
Note: To redial the last number dialled (if not
using Speed Dial), do not choose a
number. Proceed to step 7.
Alternatively, if you entered your
access code using the keypad, press
the
z key once to access the last
number dialled; then press and
release the PTT.
7 To end a phone call, do one of the following:
If your radio has the deaccess code
preprogrammed, proceed to step 8.
–or–
Enter the deaccess code using the keypad.
8 Press the Phone button to exit Phone Mode.
–or–
t to exit Phone Mode
and return to
–or–
Hold down
t to exit Menu Mode.
Phone
1 u to enter Menu Mode.
2 y or z until
3 u to select
4 y or z until
5 u to select
Program Lists
Program Lists
Phone List
Phone List