Motorola GM160

25
English
SCAN
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted
calls or noise (a “nuisance” channel), use the
Scan button to temporarily delete the channel
from the scan list.
Note: You cannot delete a priority channel (see
page 26) or the last remaining channel in a
scan list.
Restoring a Channel to the Scan List
To restore a previously deleted channel to the
scan list, restart the scan operation or turn
your radio off and on again.
EDITING A SCAN LIST
A scan list is a group of up to 16 channels.
Each channel can have a scan list assigned to
it. The same channel can be included in
severalscanlists,andthesamescanlistcan
be assigned to several Channel Selector
positions. For example:
When you edit a scan list, you can either add,
delete, or prioritize channels. The K symbol
will appear on the display while you are in edit
mode.
Note: Your radio cannot receive any calls while you
areeditingascanlist.
Adding or Deleting Channels in a Scan List
To add or delete channels in a scan list:
1 While the radio is on the nuisance channel, hold
down the
Scan button until you hear a tone.
2 Release the Scan button. The nuisance
channel is deleted.
Position 2 Position 14
C
h
a
n
n
e
l
s
11
32
53
611
1
u to enter Menu Mode.
2
y or z until
3
u to select
4
y or z until
Program Lists
Program Lists
Scan List