4
Audio Tones
English
Audio Tones
High pitched tone Low pitched tone
Self test: Sounded on power up or
selecting between
trunked and conventional
Mode.
Tone A: Call clear indication.
Tone B: Speech channel
allocated and PTT/Mic/
Loudspeaker enabled.
Tone C1: System busy.
Tone C2: Unavailable.
Tone C3: Called party busy.
Tone C4: Invalid number.
Tone D: Call set up in progress,
wait for further
indications.
Tone E: Incoming call, press PTT,
then wait for further
indications.
Tone F: Transaction confirmed,
called unit will call back.
Tone G: Look at display for call set
up or system information.
Tone H: Invalid entry.
Key click: Confidence tone when
any key pressed/speech
limitation warning.
Fail tone: Hardware error or call
timed out.
Display Icons
The icons which appear on the display are:
Scanning.
Control Channel Confirmed or
in Conventional mode -Carrier Monitor Selected.
Call In Absence Received.
Tx Frequency=Rx Frequency (Conventional Mode).
External Alarm Selected.
Loudspeaker Open.
Above button A - Conventional mode selected.
Above button B - Call in absence interrogate
selected.
Above button C - External alarm selected.
Audio Tones/Display Icons
To Next Page
Loading...
