Motorola GP2000 Service Manual

4-10 Programming Mode
ALP-XXXX Button A Long
Press Action
ALP-DISP,
É
(See above)
ALP-PID See above.
BSP-XXXX Button B Short
Press Action
BSP-DISP,
É
(See above)
BSP-SQL See above.
BLP-XXXX Button B Long
Press Action
BLP-DISP,
É
(See above)
BLP-PHN See above.
CSP-XXXX Button C Short
Press Action
CSP-DISP,
É
(See above)
CSP-PL See above.
CLP-XXXX Button C Long
Press Action
CLP-DISP,
É
(See above)
CLP-
LOCK
See above.
DSP-XXXX Button D Short
Press Action
DSP-DISP,
É
(See above)
DSP-
SCAN
See above.
DLP-XXXX Button D Long
Press Action
DLP-DISP,
É
(See above)
DLP-NDEL See above.
AC CODE Access Code 16 charac-
ters consist
of 1,2, É, 9,
0, A, B, C,
D, *, # and
Pause.
Blank ¥ Access Code is dialed when you want to access the
landline telephone network.
¥ Once it is programmed, it can be sent by pressing
PTT, followed by +, and then *.
¥ Pause can be entered by pressing * followed by #.
¥ Enter # 16 times, to completely erase entered code.
¥ Refer to "4.10.5 Programming an Phone Number/
Access Code/De-access Code" on page 22 for
details.
DA CODE De-access
Code
16 charac-
ters consist
of 1,2, É, 9,
0, A, B, C,
D, *, # and
Pause.
Blank ¥ De-access Code is dialed when you want to discon-
nect from the landline telephone network.
¥ Once it is programmed, it can be sent by pressing
PTT, followed by +, and then #.
¥ Pause can be entered by pressing * followed by #.
¥ Enter # 16 times, to completely erase entered code.
¥ Refer to "4.10.5 Programming an Phone Number/
Access Code/De-access Code" on page 22 for
details.
RW
Parameter
Description Range
Default
from
Factory
Remarks

Motorola GP2000 Specifications

General

Sealing	IP54
Channel Capacity	16 channels
Power Output	5W
Battery Life	8 hours
Weight	350 g