12
English
Basic Radio Operation
Failsoft Operation (Trunked Modes)
The failsoft system ensures that you will continue to have radio
communication capability in case of a trunked system failure. Dur-
ing trunked operation, if the central trunking controller fails, the
radio will automatically switch to failsoft operation according to pre-
defined programming. In failsoft operation, your radio can transmit
and receive on a conventional, predetermined frequency. When
you are in failsoft operation, you will hear a faint beeping sound
every ten seconds. This feature is programmable by your autho-
rized Motorola dealer.
CONVENTIONAL CHANNELS
Up to ten (10) conventional channels can be programmed into the
radio.
Selecting a Conventional Channel
1. Press the Select button or Home button until the desired
conventional channel is displayed.
• A conventional channel is indicated by digits only.
Your radio is now set to receive and transmit calls on the selected
conventional channel.
Receiving a Call (Conventional Channels)
1. Turn on the radio and select the desired conventional channel.
2. Listen until you hear activity, then adjust the volume control for
a comfortable listening level.
OTE:
The squelch opening level setting may be reprogrammed at an autho-
rized service facility.
• The YELLOW receive LED will light continuously while the
radio is receiving.
Your radio is now set to receive calls on the selected conventional
channel.
Sel
Hm
To Next Page
Loading...
