24
English
Scan Operation
INTRODUCTION
The scan feature allows you to monitor activity on different trunked
modes and conventional channels by scanning a list of up to eight
(8) members. Trunked modes and conventional channels are pre-
programmed into a scan list by your authorized Motorola dealer.
TURNING SCAN ON/OFF
1. To turn Scan ON, press the Scan button.
• The ( ) scan icon will be displayed, indicating scan is
active. The radio will scan for activity in the trunked modes/
talkgroups or conventional channels that are defined in the
scan list.
2. To turn Scan OFF, press the Scan button again.
OTE:
To initiate a call properly during scan mode, press the PTT button for a
few seconds.
PROGRAMMING / VIEWING A SCAN LIST
1. Press the Menu button until the
display indicates:
2. Press the Select button to select
“Scan Programming/Viewing mode”.
• The radio will sound four quick
tones and the display will indicate:
3. When in scan programming, use the Talkgroup Select
or buttons to scroll through all trunked modes/talk-
groups and conventional channels.
• Trunked modes/talkgroups and conventional channels cur-
rently in the scan list will be indicated by the ( ) scan
icon.
To Next Page
Loading...
