Need help?Do you have a question about the Motorola GTR 8000 and is the answer not in the manual?
Provides a high-level description of the GTR 8000 Base Radio and its function.
Details the components of the GTR 8000 Base Radio and GPW 8000 Receiver.
Lists the available system architectures for the GTR 8000 Base Radio.
Lists detailed specifications for GTR 8000 Base Radio and GPW 8000 Receiver.
Explains the functions of the transceiver, power amplifier, fan, and power supply modules.
Describes the Radio Frequency Distribution System (RFDS) equipment.
Lists prerequisites and steps before installing the equipment.
Details crucial safety precautions for equipment installation and servicing.
Provides specific instructions for installing hardware components.
Identifies software applications required for device configuration.
Covers configuration procedures using Configuration/Service Software (CSS).
Procedure for aligning the internal frequency reference oscillator.
Steps for tuning preselector assemblies for optimal performance.
Provides general troubleshooting steps and common problems.
Lists tools available for viewing and troubleshooting equipment.
Lists Field Replaceable Units (FRUs) and their part numbers.
Step-by-step procedure for replacing the transceiver module.
Procedure for replacing the power supply module.
Procedure for replacing the 700/800 MHz duplexer module.
Describes indicator LED states for various conditions.
Provides specifications for Radio Frequency Distribution System (RFDS) equipment.
Details the sequence of steps for recovering the base radio after failure.
Describes receiver mute option kits for various configurations.
Details the T1-2R with Talk-Around option kit capabilities and usage.
Describes the T2-2R with Duplexer and Triple Relay option kit.
Lists all parts required for the analog simulcast cable assembly.
Procedure for installing the analog simulcast cable in an open rack.
Defines pin assignments for the analog simulcast cable connections.
To Next Page
General
