Motorola GTR 8000 - CSS Configuration Parameters for the GTR 8000 Base Radio (Conventional)

GTR8000BaseRadio
4.4.9CSSCongurationParametersfortheGTR8000Base
Radio(Conventional)
Prerequisites:
TheEthernetTypeeldforastandaloneconventionalbaseradiomustbesetto10Mbit,half-duplex.
Beforeproceedingwiththisprocess,completetheinitialcongurationofthedevicein.
ForcongurationparametersforaconventionalGTR8000BaseRadio,seethefollowingintheCSSOnlineHelp:
•Analog-only,Digital-only,orMixedModeGTR8000BaseRadio:ConventionalSite-ASTRO7.12and
Later
•Digital-onlyGTR8000Badio:ConventionalSite-ASTRO7.11andEarlier
ProcessSteps
1ConnecttothebaseradiothroughanEthernetportlinkandthenreadthecongurationlefromthebaseradio.
See4.4.4ConnectingThroughanEthernetPortLink,page4-11.
2ClickSiteintheSystemtreeandcompletetheelds.
3ClickHardwareCongurationintheSystemtreeandcompletetheeldsonthetwotabs.
AspartofRMCconguration,youwillneedtosettheDIPswitchesontheRMC/LNAmodules.See
4.4.11SettingRMCSystemGain,page4-32.
4ClickOptionsintheSystemtreeandcompletetheelds.
5ClickInfrastructureInterfaceintheSystemtreeandcompletetheeldsonthethreetabs.
6ClickChannelCongurationintheSystemtreeandcompletetheelds.
7ClickRepeaterCongurationintheSystemtreeandcompletetheelds.
8ClickReceiverScanintheSystemtreeandcompletetheelds.
9ClickRepeaterAccessintheSystemtreeandcompletetheelds.
10ClickWildCardTablesintheSystemtreeandcompletetheeldsonthethreetabs.
4-306871022P86-A-November2012