Motorola GTR 8000 - Loading Software to a Device

3.8.3LoadingSoftwaretoaDevice
ProcedureSteps
1LaunchanSSHterminalserversessioninPuTTYtoaccesstheUNCServerAdministrationmenu.Seethe
SecuringProtocolswithSSHmanual.
Stepresult:TheUNCServerAdministrationmenuappears.
2SelectOSImagesAdministrationfromthemenu.PressENTER.
Stepresult:TheOSImagesAdministrationmenuappears.
3SelectLoadnewOSimagesfromthemenu.PressENTER.
Stepresult:AmessageappearsindicatingtherearetwomethodsforloadingOSImages.
4InserttheMotorolaDeviceOSImagesCDintotheCD/DVD-ROMdriveoftheserver.
Stepresult:Thedrivelightstartsblinkingontheserver.
5Whenthedrivelightstopsblinking,pressENTER.
Stepresult:TheOSimagesloadontheUNC.
6SelectViewOSImagesfromthemenu.PressENTER.
Stepresult:Thedevicesoftwareimageappears.
7SelectEjectCDfromthemenu.PressENTER.
Stepresult:Themediaejectsfromthedriveonserver.
8RemovetheOSImageCDfromtheCD/DVD-ROMdriveoftheserver.
9Tologoutoftheserver.PressENTER.
Stepresult:TheUserCongurationServerAdministrationmenuappears.
10PressENTERagain.
Stepresult:Thepromptappears.
3.8.3LoadingSoftwaretoaDevice
Theseproceduresareforasingledevicedownload.Forasitedownload,see3.7UsingSoftware
Download,page3-39.
ThefollowingproceduresdescribehowtoloadsoftwareimagesontoUNCanddownloadandinstallthissoftwareto
thedevice.However,beforeinstallingthesoftware,FTPservicemustbeenabled.
6871022P86-A-November20123-45