Getting Started 13
ENGLISH
Step 7: Insert the Top Pole (with night light ring) into the cot
mount stand. It will lock into place with a 'click'.
Step 8: Dock the baby unit into the top pole (with night light ring)
as shown in the picture below.
Note: Before removing the camera from the top pole. Rotate the top
pole outside the cot area to avoid the possibility of the camera falling
into the cot.
Step 9: Plug the Power Adapter (DC5V / 1.5A) into the socket on
Cot Mount Stand and the other end to a suitable electrical outlet.
To Next Page
