40 Wi-Fi® Internet Viewing
5.5 Procedure for Resetting the Camera
Note: If your Camera is moved from one router (e.g. home) to
another (e.g. office) or you have Camera setup issues, then the
Camera must be reset. Please reset the Camera with the following
procedures:
1. Slide the ON/OFF switch to OFF.
2. Press and hold the PAIR button, then slide the ON/OFF switch
to ON.
3. Release the PAIR button when you hear a confirmation beep
and wait for the Camera Unit to complete an internal reset
procedure. The LED indicator will turn red and flash slowly
when the Camera Unit is reset successfully.
4. You can add your Camera again by following the steps in
section 5.3.3 for Android™ devices or in section 5.4.3 for iOS
®
devices.
To Next Page
Loading...
