Motorola HT1250 User Manual

23
English
GETTING STARTED
ADJUSTING THE VOLUME
SELECTING A ZONE
A zone is a group of up to 16 channels. To
access a channel in a zone, you need to select
the zone first.
To select a zone:
SELECTING A RADIO CHANNEL
Your radio offers 128 channels (8 zones of 16
channels each).
Note: Due to government regulations, some
channels may not be programmed. Ask
your dealer for more information.
To select a channel:
1 Hold down the Volume Set or Monitor button
(see page 10); you will hear a continuous
tone.
2 Turn the On-Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set or Monitor button.
1
) to enter Menu Mode.
2
+ or ? until
3
) to select
4
+ or ? until you see the desired zone
name.
5 ) to select the zone.
1 Select the appropriate Zone, if required (see
“Selecting a Zone” on page 23).
2 Turn the Channel Selector knob clockwise or
counterclockwise until you reach the desired
channel, as shown on the LCD display.
Zone
Zone
GettingStarted.fm Page 23 Monday, September 30, 2002 2:08 PM

Motorola HT1250 Specifications

General

Power Output	1-5W (VHF), 1-4W (UHF)
Emergency Button	Yes
IP Rating	IP54
Frequency Range	136-174 MHz (VHF), 403-470 MHz (UHF)
Keypad	Limited Keypad
Signaling	MDC1200, DTMF, Quick Call II
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Channel Capacity	128 channels
Dimensions	137 mm x 57.5 mm x 37.5 mm
Display	Yes, alphanumeric