Motorola HT1250

38
English
PHONE
MODIFYING THE PHONE LIST K
You can modify a phone list in three ways:
• Add an entry
• Delete an entry
• Edit an existing entry
The K symbol will appear on the LCD screen
when you are modifying the phone list.
Note: The radio cannot receive any calls while
you are modifying the phone list.
To Add an Entry (for full-keypad radios only):
5 Note: Press the PTT button, if required for your
radio.
Note: To redial the last number dialed (if not
using Speed Dial), press and release the
PTT button. The radio sends the last
number dialed.
–or–
If you entered your access code using the
keypad, press the
? key once to access
the last number dialed; then press and
release the PTT button.
6 Switch to the desired channel.
Hold the radio in a vertical
position with the microphone 1
to 2 inches (2.5 to 5 cm) away
from your mouth.
7 To end a phone call, do one of the following:
Enter the deaccess code using the keypad.
–or–
If your radio has the deaccess code prepro-
grammed, go to step 8.
8 Press the Phone button to exit Phone Mode.
–or–
8
( to exit Phone Mode
and return to
Phone.
–or–
Hold down
( to exit Menu Mode.
1
) to enter Menu Mode.
2
+ or ? until Program Lists
Phone
Program Lists
Phone.fm Page 38 Monday, September 30, 2002 2:10 PM