34
English
SCAN
DELETING A NUISANCE CHANNEL
If a channel continually generates unwanted calls
or noise (a “nuisance” channel), use the Scan
button to temporarily delete the channel from the
scan list:
Restoring a Channel Back to the Scan List
To restore a previously deleted channel back to
the scan list, restart the scan operation or turn
your radio off and on again.
EDITING A SCAN LIST
A scan list is a group of up to 16 channels.
Each position on the Channel Selector knob
can have a scan list assigned to it. The same
channel can be included in several scan lists,
and the same scan list can be assigned to
several Channel Selector positions. For
example:
When you edit a scan list, you can either add,
delete, or prioritize channels.
Your radio cannot receive any calls while you
are editing a scan list. The K symbol will be
displayed while you are in edit mode.
1 While the radio is on the nuisance channel, hold
down the Scan button until you hear a tone.
2 Release the Scan button. The nuisance chan-
nel is deleted.
Note: You cannot delete a priority channel (see
page 35) or the last remaining channel in
a scan list.
Position 2 Position 14
11
3 2
5 3
611
Scan.fm Page 34 Monday, September 30, 2002 2:09 PM
To Next Page
Loading...
