8
Installing the Handsfree Kit
Installing the
Handsfree Kit
Guidelines for Installation and
Connection
•
Only qualified personnel should install this car kit. If
necessary, contact the vehicle manufacturer for air
bag information specific to the vehicle.
Caution:
An air bag inflates with great force.
DO NOT
place objects, including communication equipment, in the
area over the air bag or in the air bag deployment area. If
the communication equipment is improperly installed and
the air bag inflates, serious injury could occur.
•
Mount components securely on strong surfaces to
prevent shifting that could cause injury or interfere
with safe vehicle operation. Always use the supplied
mounting hardware
•
Mounted components and attached wires or cables
must not interfere with seating or leg space.
•
Route cables so they are protected from pinching,
sharp edges, and crushing. Keep all in-line
connectors easily accessible.
•
This car kit is intended for use in 12 volt negative
ground systems only. The car kit draws less than 5
amps. Confirm that the vehicle’s electrical system can
supply this current.
BTHandsfree_multi.book Page 8 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
