24
Using Your Car Kit
Placing a Call with the Car Kit
To place a call, you must first establish a Bluetooth
®
link
between the car kit and your phone (see page 19).
You can place a call with the car kit in these ways:
•
Dial a number from the phone.
•
Digit dial with Speech recognition.
•
Use the system’s Contact List.
•
Speak a phone voice tag [phone voice name].
•
Use the
Speed Dial
command.
•
Use the
Redial
command.
•
Use last number redial from the User Interface
Module.
When connected, all of these calls are handsfree. You can
terminate a SR session at any time by pressing the END
button.
Placing a Call with Speech recognition
You can enter a phone number as 1 or more segments of
digits. A segment can include up to 15 digits. An entire
number can include no more than 32 digits. You can begin
the number set with the * or # character.
Note:
Speak numbers as continuous digits. For example,
dictate 555-2211 as “
5-5-5-2-2-1-1
”, not
“
5-5-5-twenty-two-eleven
.”
BTHandsfree_multi.book Page 24 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
