37
Using Your Car Kit
Selecting a Language
Note:
When you change your system’s language, all
contacts in your
Contacts
list are deleted.
Action
1
Press and hold the END button, turn on the vehicle
ignition, and continue holding the END button for at
least 10 seconds.
The system enters language selection and responds:
Language Menu. Press volume up or down to change language
.
2
Use the Volume UP/DOWN buttons to scroll through
the language choices.
As you scroll to a language, the system plays the
prompt for that language. (For example:
English. To
choose this language, restart the vehicle.
)
3
When you have selected the desired language, turn
off the vehicle ignition.
The next time you turn on the vehicle ignition, the
new language is loaded.
BTHandsfree_multi.book Page 37 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
