20
Using Your Car Kit
Initial Pairing
Note:
Use this procedure ONLY if there are no handsets
paired to the system.
With the car kit and phone in close proximity:
Action
1
Press the TALK button.
2
When prompted, say “
Pair Phone
.”
The system responds:
Set your phone in scan mode and
enter 1234 when prompted for the passcode
.
3
When the phone displays the device name, select
the device.
The phone displays the passcode entry screen.
4
Enter the passkey (
1234
).
The phone displays “PIN verified,” and the system
says:
Pairing complete. Connection in progress.
Note:
Some phones ask you to accept the BT link.
Enter Yes.
Upon successful completion, the system says:
Connection is complete. Phone <
n>
ready for use
.
BTHandsfree_multi.book Page 20 Tuesday, July 12, 2005 8:46 AM
To Next Page
Loading...
