Motorola IHF1000 - Using the Speed Dial Command

27
Using Your Car Kit
Using the Speed Dial Command
Note: Speak speed dial numbers as continuous digits. For
example, dictate speed dial location 22 as “
2-2 ”, not
“
twenty-two .”
2 When prompted, say “ Phone voice tag [Phone
Voice Name
].”
Note: The voice tag must already be stored in the
phone.
The system responds:
Phone voice tag please,[Phone voice
name, please
. ]
3 Say “ <voice tag> ” (where <voice tag> is a voice tag
stored in the phone).
The system calls the number associated with the
phone voice tag [phone voice name].
Action
1
Press the TALK button.
2 When prompted, say “ Speed Dial. ”
The system responds:
Speed dial number, please.
3 Recite the speed dial number.
The system repeats the number it heard and asks:
Is this correct?
4 If the number recited is correct, say “ Yes. ”
The system responds:
Dialing , and places the call.
Action
BTHandsfree_multi.book Page 27 Tuesday, July 12, 2005 8:46 AM